GL Series Filter Control Valve

GL Series automatic Filter control valves correspond to the corresponding specifications of DR\GR Softening valves. The structure Internal and External is similar, the installation method is same, FLOW/TIME dual mode, In the inlet has the flow meter, Achieve all station control by FLOW and water retention memory. Multi-mode relay output interface, LED\ LCD, touch screen display operation panel, and top and side loading, With the same specification of DR\GR Softening valve is suitable for various situation.

1. Plane sealing, independent valve mouth ceramic ring, specially equipped with a transposable channel to relieve pressure, no wear for ceramics;

2. Dual mode for flow and time, five-button operation control;

3. Flow controlled by inlet flow meter fully, instantaneous water, accumulated water, program power memory and water memory can be controlled;

4. Delay backwash can be set;

5. Parallel interlock, external control interface, relay output multiple mode interface.

GR Series Fixed Bed Up Flow Regenerating Softener Valve

GR Series has meter and timer dual mode, it can be switched to each other by key. In the flow mode, the internal flow transducer realizes the switch of all stations as long as the amount of brine, the amount of slow washing water and the amount of washing water is set according to the volume (liter) of the swap tank. After the period of softening water amount (ton) is set according to the hardness of the raw water, each station decreases to "0" according to the set value, and stops decreasing and maintains when the water is out of service or no water.

1. Default Meter mode, which can be switched to time mode

2. Power outage memory and water outage memory

3. Independent valve port, channeling channel, planar ceramic seal valve core

4. Multi-set interlock and multi-mode output control

5. Extensible 485 interface

6. Delayed regeneration function, it can be set cycles to back wash

Tài Liệu: Liên hệ

Bảo hành: 1 năm